Roof underlayment is the water resistant layer installed over the roof deck and under the shingles, metal, or tile. It is the roof's second line of defense. Shingles shed most rain, but wind can drive water under them, a shingle can blow off in a storm, and ice can push meltwater uphill under the edge of the roof. When any of that happens, the underlayment is what keeps water off the wood deck and out of your home.
Most homeowners never see it, which is why it gets so little attention on a roofing estimate. That is a mistake. The layer nobody sees decides whether a small roof problem stays small or turns into stained ceilings, wet insulation, and rotted decking. It can also decide what your shingle warranty covers. This guide explains what underlayment is, the three types, what each costs in 2026, what the building code requires, and how to pick the right one for your roof.
What Roof Underlayment Is
Roof underlayment is a sheet or membrane laid over the roof decking before the roof covering goes on. It sits in the middle of the roof stack, between the wood below and the shingles above.
From the attic up, a typical shingle roof is built in this order:
- Rafters or trusses, the frame that carries the roof
- Roof deck, usually plywood or OSB sheets nailed to the frame
- Underlayment, plus ice and water shield in the spots where water collects
- Shingles, metal panels, or tile, the covering you see from the street
Think of underlayment as a raincoat under a jacket. It is not glamorous, and you would notice fast if it were missing. The covering does the visible work of shedding rain. The underlayment catches whatever the covering misses and carries it down the slope to the eave, instead of letting it soak into the deck.
Underlayment is water resistant, not waterproof, with one exception. Felt and synthetic sheets shed water flowing down the slope, but nail holes, tears, and wrinkles let water through, and standing water eventually soaks in. Only the self adhering membrane, commonly called ice and water shield, forms a true waterproof seal. That distinction matters, because it decides where each product belongs on the roof.
What Underlayment Actually Does
Underlayment handles what the shingles miss. It does five main jobs, and a roof without it is weaker in all five.
It blocks wind driven rain. Shingles overlap, but they do not form a sealed surface. In a strong storm, wind pushes rain sideways under the tabs and through the seams. Underlayment catches that water and sheds it down to the eave.
It protects the deck during the job. Between tear off and shingling, the bare deck can sit exposed for hours or days. Underlayment keeps a surprise shower off the wood while the crew works, and it can serve as the main weather barrier for several weeks if the schedule slips.
It gives shingles a smooth surface. Raw decking has joints, bumps, and nail heads. Underlayment pads those out so shingles lie flat and look clean, instead of showing every bump in the deck through the covering. Roofers call that telegraphing, and it is easy to spot on a roof laid over a rough deck.
It separates the covering from the deck. Resin in wood decking and heat from metal panels can both damage a covering that sits directly on the wood. Underlayment puts a barrier between them, and under metal it also lets the panels move with temperature without sticking to the deck.
It helps the roof meet code and fire ratings. Most roof assemblies are tested and rated as a complete system, underlayment included. Building codes require underlayment under nearly every pitched roof covering, and many shingle manufacturers require an approved underlayment for their full system warranty. Use the wrong product, or skip it, and your warranty coverage can shrink.
The Three Types of Roof Underlayment
There are three main families of underlayment, and each one has a job it does best. The choice is not about which type is best in general. It is about which type belongs in each part of your roof.
Felt Underlayment
Felt is the original underlayment, and it is still the cheapest. It is paper or fiberglass mat soaked in asphalt, the material most people mean when they say tar paper. It comes in two common weights, 15 pound and 30 pound, with 30 pound being thicker and heavier. The number refers to the weight of a 100 square foot roll, roughly 15 or 30 pounds.
Felt has two real advantages: it is cheap, and every roofer knows how to work with it. Its disadvantages are just as real. It tears easily in high wind, it absorbs water instead of repelling it, it wrinkles when it gets wet, and it dries out and becomes brittle after years of heat. A roll covers far less area than a roll of synthetic, and it is heavy to carry up a ladder. Felt is a fair choice for a short term roof or a tight budget, and a poor choice for a roof you expect to last 25 years or more.
Synthetic Underlayment
Synthetic underlayment is a sheet of woven or spun polypropylene or polyethylene, treated with a polymer coating. It is the standard choice under most asphalt shingle roofs in the United States today, and it has replaced felt on most professional jobs.
It is lighter, stronger, and more tear resistant than felt, it repels water instead of absorbing it, and it lies flat without wrinkling. A single roll covers far more area than a roll of felt, which means fewer laps and faster installation. It is also safer to walk on, because most products have a slip resistant surface, and it holds up far better if weather delays the shingles for a few days or weeks. Owens Corning notes that synthetic underlayments outperform felt across the board, and that they are more durable and simpler to install.
Synthetic has two cautions worth knowing. First, it costs more than felt, usually around 50 percent more per square, though the gap is small on a whole roof. Second, many synthetic products have a low perm rating, which means they do not let water vapor pass through easily. On a roof with poor attic ventilation, a low perm underlayment can trap moisture in the deck. Check the perm rating on the product data sheet and make sure your attic vents properly before choosing a synthetic.
Self Adhering Membrane, or Ice and Water Shield
Self adhering membrane is a rubberized asphalt sheet with a sticky backing that bonds directly to the deck when the release film is peeled away. You may know it as ice and water shield, which started as a brand name and became the generic term, the way people say tar paper for felt.
It is the only underlayment that is truly waterproof, and the only one that seals around nail holes. When a nail goes through it, the rubberized asphalt closes around the shaft, so water cannot follow the nail down into the deck. That makes it the right product everywhere water collects or backs up: along the eaves where ice dams form, in valleys where two slopes meet, around chimneys, skylights, and vents, and anywhere the roof is low slope.
It costs far more than felt or synthetic, so it is not used over the whole field of most roofs. It goes in the vulnerable areas, where its sealing ability earns its price. In hurricane zones and on very low slope roofs, some homeowners cover the entire deck with it for maximum protection, but that is a decision to make with a roofer, because a full deck membrane also blocks vapor and changes how the roof dries.
| Type | Material | Waterproof | Seals Around Nails | Cost per Square |
|---|---|---|---|---|
| Felt, 15 or 30 pound | Asphalt saturated paper or fiberglass mat | No, water resistant | No | $10 to $25 |
| Synthetic | Woven polypropylene or polyethylene | No, water resistant | No | $12 to $35 |
| Self adhering membrane | Rubberized asphalt, peel and stick | Yes | Yes | $40 to $100 |
Felt vs Synthetic: Which One Wins
For most homes in 2026, synthetic wins, and the roofing industry has already voted that way. Felt is cheaper per roll, but synthetic covers more area per roll, installs faster, tears less in wind, and does not wrinkle when it gets wet. On a typical home, the material difference between felt and synthetic for the whole roof is only a few hundred dollars, a small share of a roof replacement that often runs $10,000 to $25,000.
Felt still has a place. It is a reasonable choice for a shed, a garage, or a roof you plan to replace within a few years, and some older roofers prefer it because they have worked with it for decades. But for a primary residence, synthetic is the better value. It lasts longer, it protects the deck better during installation, and it is what most shingle manufacturers expect under their products.
One comparison that trips people up is 30 pound felt versus synthetic. The heavier felt is tougher than 15 pound felt, but it is still felt: it absorbs water, it wrinkles, and it breaks down in heat. A heavier felt designation does not settle the question. Compare the exact products, including tear strength, UV exposure limits, fastening, slope details, and warranty conditions, not just the category name.
Ice and Water Shield: Where It Goes and Why It Matters
Ice and water shield is not a field underlayment. It is a specialist layer, and its placement is what makes it valuable.
In cold climates, code requires an ice barrier from the roof edge to at least 24 inches inside the outside wall line, because that is where ice dams form. Meltwater backs up behind a ridge of ice at the eave and is pushed uphill under the shingles. Felt and synthetic shed water flowing down, not water pushed up. Only a self adhering membrane stops it, because it bonds to the deck and seals around every nail.
The same logic applies everywhere water collects or lingers: in valleys, around chimneys and skylights, at sidewalls, around pipe boots, and on low slope sections. The National Roofing Contractors Association recommends ice and water shield at the eaves extending upslope to at least 36 inches inside the exterior wall, and in areas where the average January temperature is 30 degrees Fahrenheit or less. For high temperature applications, such as under metal roofing, use a high temperature rated membrane. Standard membranes can melt or bond to hot metal panels, so check the temperature rating before you buy. Our guide to synthetic underlayment for metal roof covers the heat problem in detail.
How to Choose the Right Underlayment
The right underlayment depends on four things: your climate, your roof pitch, your roof covering, and how long you plan to stay in the home. Here is how the combinations usually fall out.
| Situation | Recommended Underlayment |
|---|---|
| Standard shingle roof, moderate climate | Synthetic in the field, self adhering membrane at eaves, valleys, and penetrations |
| Cold, snowy climate | Synthetic in the field, self adhering membrane at eaves, valleys, and penetrations, extended to code depth |
| Hot, humid climate | Synthetic, since it will not soak up moisture; ask for a high temperature rating under dark shingles |
| High wind or coastal area | Synthetic with tighter fastening, or a full deck self adhering membrane |
| Low slope, 2:12 to 4:12 | Two layers of underlayment, or a full self adhering membrane |
| Metal or tile roof | High temperature underlayment approved by the roof manufacturer |
| Short term roof or tight budget | Felt, with the understanding that it is the budget option |
Attic ventilation is the detail people miss. Many synthetic underlayments do not let moisture pass through, so the attic needs to vent properly. If you plan to spray foam the underside of the roof later, tell your roofer now, because that changes which underlayment makes sense.
Underlayment by Roof Covering
Most guides treat underlayment as one decision. In practice it is five decisions, because each roof covering asks something different of the layer underneath it.
Asphalt shingles. Synthetic underlayment is the standard, with self adhering membrane in the vulnerable areas. Shingles last 25 to 35 years, and a good synthetic lasts about as long, so the two wear out together. Felt is acceptable but ages faster than the shingles above it, which means the backup layer can fail before the covering does.
Metal roofing. Metal is the hardest test for underlayment, because it gets far hotter than shingles. A dark steel panel in full sun commonly reaches 150 to 190 degrees Fahrenheit on the surface. Standard synthetic can deform at those temperatures, so metal roofs need a high temperature rated synthetic, rated for continuous exposure to at least 240 degrees Fahrenheit, plus high temperature self adhering membrane in the valleys and at the eaves. Felt should never go under metal: it melts, wrinkles, and sticks to the panels. For the full picture, see our guides to minimum pitch for metal roof and how long does a metal roof last. If you are planning a metal roof, our metal roofing service covers the full system, underlayment included.
Clay and concrete tile. Tile roofs last 50 years or more, far longer than any felt and longer than most synthetics. That makes the underlayment the weak link: the tiles will outlive it, and replacing the underlayment means removing the tiles. Tile roofs need a premium, long life underlayment, usually a heavy synthetic or a self adhering membrane, chosen to last as long as the tile above it.
Slate. The same problem, more extreme. A slate roof can last 75 years or longer. Budget underlayment under slate is a false economy, because the day the underlayment fails, the whole slate roof has to come off to fix it. Slate demands the best underlayment available, and the choice should be made with the slate manufacturer, not the lowest bidder.
Cedar shake and shingle. Wood roofs need to dry, and they need an underlayment that lets them do it. A low perm synthetic can trap moisture against cedar and shorten its life. Cedar roofs often use a breathable underlayment or a ventilated batten system that lets air move under the shakes. Do not transfer an asphalt shingle membrane detail to a wood roof without checking the wood roofing manufacturer's instructions.
What the Building Code Requires
Underlayment is not optional. The International Residential Code, the code most US cities adopt, requires it under nearly every pitched roof covering. The key sections are R905.1.1, which sets the underlayment standards for each covering, and R905.1.2, which sets the ice barrier rules for areas with a history of ice forming along the eaves.
Three code rules matter most for homeowners.
Low slope roofs need double underlayment. Asphalt shingles may only be used on slopes of 2:12 or greater. From 2:12 up to 4:12, the code requires a double underlayment application. Above 4:12, one layer is enough. Adding layers does not authorize shingles below 2:12, no matter how much underlayment you use.
Ice barriers have a minimum depth. Where ice dams are a known problem, the ice barrier must run from the eave to at least 24 inches inside the outside wall line. The NRCA recommends going further, to 36 inches inside the wall, because the water backup often reaches further than the minimum.
The covering manufacturer has the final word. Code sets the floor, not the ceiling. Shingle and metal manufacturers publish their own underlayment requirements, and following them is often a condition of the warranty. If the code says one layer is enough but your shingle manufacturer requires a specific synthetic, follow the manufacturer. The National Roofing Contractors Association publishes underlayment guidance that your contractor should follow, and it recommends self adhering membrane with a minimum thickness of 40 mils.
Local codes can add their own rules, and some towns inspect the underlayment before the shingles go on. Confirm what your city adopted before the job starts, not after the roof is covered.
Roof Underlayment Cost in 2026
Underlayment is a small slice of a roof replacement, but it is the slice that protects everything else. These are material costs per square, where a square is 100 square feet of roof area. Installed cost is higher, because labor, fasteners, and overlaps are built into the roofer's price.
| Type | Material Cost per Square | Material Cost per Square Foot |
|---|---|---|
| Felt underlayment | $10 to $25 | About $0.25 |
| Synthetic underlayment | $12 to $35 | $0.25 to $0.50 |
| Ice and water shield | $40 to $100 | $0.60 to $1.25 |
On a typical home of 20 to 30 squares, synthetic underlayment for the whole roof runs a few hundred dollars to about $1,000 in material. Adding ice and water shield at the eaves and valleys usually adds $400 to $1,500. Covering the entire deck in membrane can add $1,500 to $4,000 or more.
The cost that surprises people is decking. Once the old roof comes off, any rotted sheets must be replaced, often at $80 to $150 per sheet. Make sure your quote lists that price up front, so a soft deck does not become a surprise charge. For the full cost picture, see our guide to average roof replacement cost.
How Long Underlayment Lasts and Signs It Is Failing
There is no single lifespan for underlayment. It depends on the product, the heat it sees, the covering above it, and how well it was installed. As a rough guide, felt lasts 5 to 12 years, standard synthetic lasts 20 to 30 years, and high temperature synthetic lasts 25 to 40 years. Under a completed roof, underlayment is protected from sun and weather by the covering, so it usually outlives its rated life. The failures show up early, and they show up when the underlayment was the wrong product, was installed wrinkled, or was left exposed to sun beyond its rating.
Underlayment failure is usually found at tear off, when the old roof comes off, or through the symptoms of leaks. Watch for these signs:
- Brittle, cracked, or crumbling felt where shingles have been lifted
- Exposed underlayment where shingles blew off, faded, or tore
- Water stains on the underside of the deck in the attic, often below valleys or penetrations
- Wrinkles or ridges telegraphing through the shingles, from felt that buckled when wet
- Rotted or soft decking under failed underlayment
Replacing underlayment means removing the covering above it. A small area around a valley or chimney can be repaired that way, by lifting the covering, tying new underlayment into sound surrounding material, and relaying the covering. Widespread failure is a different job, and it usually means a full roof replacement. That is why the underlayment choice matters at installation: it is cheap to choose well and expensive to fix later. If your roof is leaking and you need it fixed now, our roof repair service can trace the leak to its source and tell you whether the underlayment is part of the problem.
Installation Rules That Protect Your Warranty
Underlayment installation looks simple, and it is, but the details decide whether it works and whether the warranty holds.
Start at the eave and work up. Each row overlaps the row below it, so water sheds downward at every lap. The standard overlap is 4 inches on slopes above 4:12, and 6 inches or more on lower slopes. On slopes below 3:12, the better approach is to cover the roof with self adhering membrane, or to overlap synthetic underlayment by 50 percent, doubling the coverage.
Use cap fasteners, not staples. Synthetic underlayment must be fastened with plastic cap nails or cap staples, which spread the load and keep the fastener from tearing through the sheet. A standard hammer stapler is not an option for synthetic underlayment. The caps also seal the fastener hole better than a bare staple.
Keep it flat and tight. Wrinkles in underlayment telegraph through shingles and create gaps where water can sit. Roll each course tight, smooth out wrinkles as you go, and do not install it on a wet deck. A wet deck traps moisture under the underlayment, and that moisture rots the deck from the inside.
Respect the UV exposure limit. Synthetic underlayment can sit exposed to sun for a limited time before it degrades. Most products allow 30 to 90 days of exposure, and some allow up to 180 days. The limit is on the product data sheet, and exceeding it can void the warranty. If the covering will not go on for weeks, confirm the exposure rating and cover the roof if the schedule slips.
Seal the penetrations. Every vent pipe, skylight, and chimney needs self adhering membrane around it, lapped into the synthetic underlayment so water sheds away from the penetration. This is where most underlayment failures start, because it is where water collects and where the installer is most tempted to cut corners.
Follow the manufacturer instructions for the covering. Some shingle and metal manufacturers require a specific underlayment type, a specific overlap, or a specific fastener pattern, and using the wrong one can void the weather tightness warranty. Ask your contractor to show you the underlayment section of the installation manual for the exact product you are buying.
Red Flags in a Roofing Quote
When you compare quotes, the underlayment line tells you a lot about the roofer. Watch for these red flags:
- Underlayment is not listed at all
- Felt is listed with no weight or brand
- No ice and water shield in a cold climate
- No price for deck repair
- No permit, when most towns require one for a roof replacement
A good quote names the underlayment brand and product, lists where ice and water shield goes, and gives a per sheet price for deck repair. If a roofer says your roof does not need new underlayment, do not trust them. Underlayment should be replaced every time a new roof is installed, because the old layer is brittle, full of nail holes, and hiding the true condition of the deck. Pulling the old felt off also lets the crew see the deck as it truly is, including rot and gaps that would stay hidden under an old layer.
For flat and low slope commercial roofs, the underlayment question is different again, because the covering itself is the waterproofing layer. Our commercial roofing service covers membrane systems where the underlayment rules in this guide do not apply.
Frequently Asked Questions
What is roof underlayment? Roof underlayment is the water resistant layer installed over the roof deck and under the shingles, metal, or tile. It is the roof's secondary water barrier: it sheds water that gets past the roof covering and protects the deck during installation.
Is underlayment the same as tar paper? Tar paper is the common name for asphalt felt, one of the three underlayment types. The other two are synthetic underlayment and self adhering membrane, also called ice and water shield.
Which is better, felt or synthetic underlayment? Synthetic is better for most homes. It is lighter, stronger, more tear resistant, and it repels water instead of absorbing it. Felt is cheaper per roll and works for short term roofs, but it tears, wrinkles, and breaks down in heat. On a typical home, the material difference for the whole roof is only a few hundred dollars.
Is roof underlayment required by code? Yes. The International Residential Code requires underlayment under nearly every pitched roof covering, and local codes can add their own rules. Shingle manufacturers also require an approved underlayment for their full system warranty.
How much does roof underlayment cost? Materials run $10 to $25 per square for felt, $12 to $35 per square for synthetic, and $40 to $100 per square for ice and water shield. For a typical 20 to 30 square home, synthetic underlayment material runs a few hundred dollars to about $1,000, plus $400 to $1,500 for ice and water shield at the eaves and valleys.
How long does roof underlayment last? Felt lasts roughly 5 to 12 years, standard synthetic lasts 20 to 30 years, and high temperature synthetic lasts 25 to 40 years. Under a completed roof it is protected from sun and weather, so it usually outlives its rated life unless it was the wrong product or was installed badly.
Can underlayment be replaced without a new roof? A small damaged area can be repaired by lifting the covering above it and tying new underlayment into sound surrounding material. Widespread failure requires removing the covering over the whole affected area, which usually means a full roof replacement.
Do you need ice and water shield under a metal roof? Yes, in the valleys, at the eaves, and around every penetration, and it must be high temperature rated. Metal roofs run far hotter than shingle roofs, and a standard membrane can melt or bond to the panels. See our guide to synthetic underlayment for metal roof for the details.
Planning a roof replacement? Start with our guide to average roof replacement cost, learn the parts of the system in parts of a metal roof, or check the edge detail in what is a drip edge on roof. For a free inspection and an itemized quote that names the underlayment product by brand, contact our team.

