Roof Underlayment Calculator

Underlayment is the quiet layer that decides whether a roof problem becomes a ceiling stain. Count rolls for synthetic, 15 lb and 30 lb felt from real manufacturer coverage. Free, no signup, no waiting.

Ask three roofers how many rolls of underlayment a roof takes and you get one answer per product, because the roll sizes could not be more different. A synthetic roll covers five times the roof of a 30 lb felt roll. This calculator keeps the three products separate and counts each from the coverage its manufacturer prints on the spec sheet.

The calculator

Please enter your roof area in square feet (a number greater than zero).

1. Roof area

True sloped roof area in square feet. If you only have a footprint, our roof square footage calculator converts it first.

2. Underlayment type and layers

Coverage per roll is the manufacturer figure: synthetic rolls cover far more per roll than felt. Double layers are the code application for felt on low slopes between 2/12 and 4/12.

3. Waste allowance

Covers laps at valleys and hips, cuts and the odd torn sheet.

Your underlayment order

Coverage figures are the manufacturers published roll specs.

Coverage per roll, verified

  • Synthetic underlayment: 10 squares per roll. The standard roll is 48 inches wide by 250 feet long, which is exactly 1,000 square feet. GAF specifies its FeltBuster synthetic at 10 squares per roll, and comparable products from other makers match it.
  • 15 lb asphalt felt: about 4 squares per roll. Felt rolls run 36 inches wide; the 15 lb roll is 144 feet long, covering about 400 square feet before laps.
  • 30 lb asphalt felt: about 2 squares per roll. The heavier felt ships in a 72 foot roll at the same width, covering about 200 square feet.
  • Layers change everything on low slopes. Between 2/12 and 4/12 pitch, shingle manufacturers and the residential code call for two plies of felt across the whole roof, or a full layer of ice and water shield instead. The calculator has the two layer setting for exactly this case.

Product documentation for these coverages is published by GAF, and installation standards come from the NRCA.

Rolls by roof size (one layer, 10 percent waste)

Roof area Synthetic rolls 15 lb felt rolls 30 lb felt rolls
1,000 sq ft 2 3 6
1,500 sq ft 2 5 9
2,000 sq ft 3 6 11
2,500 sq ft 3 7 14
3,000 sq ft 4 9 17

The table is also the synthetic argument in miniature: fewer rolls means fewer laps, faster dry in and less weight carried up the ladder. Underlayment is one line of the full order; the roofing material calculator counts it beside bundles, sheets and nails.

Synthetic versus felt, honestly

  • Strength. Synthetic is dramatically harder to tear, walks safer underfoot and survives wind that shreds felt during dry in. Makers rate leading synthetics at many times the tear strength of 15 lb felt.
  • Exposure time. Synthetics commonly carry up to 6 months of UV exposure rating, so a delayed shingle delivery is a scheduling problem, not a redo. Felt wrinkles when wet and degrades in weeks of sun.
  • Cost. Per roll, felt looks cheap. Per square covered, the gap narrows: a 2,000 square foot roof needs 3 synthetic rolls at $90 to $130 each, or 11 rolls of 30 lb felt at $30 to $45. Labor follows the roll count too.
  • Where felt still fits. Budget re roofs, small repairs and under some tile systems, felt remains a code accepted, proven layer. On a roof under our shingle roofing crews, synthetic is the default recommendation for the reasons above.

Pair the roll count with the shingle count from the shingle bundle calculator and the order is nearly complete.

Frequently asked questions

How many rolls of underlayment do I need for a 2,000 square foot roof?

Three rolls of synthetic, six rolls of 15 lb felt, or eleven rolls of 30 lb felt, each including a 10 percent waste allowance and rounding up. The difference is roll coverage: 1,000, about 400 and about 200 square feet per roll.

Is synthetic underlayment better than felt?

On strength, water resistance, walkability and exposure time, yes, clearly. Felt costs less per roll and has a century of use behind it. Most residential re roofs today choose synthetic for everything except the tightest budgets.

Do I need two layers of underlayment?

On slopes between 2/12 and 4/12 under shingles, yes: code and manufacturer instructions require a double layer of felt or an equivalent membrane build up. Above 4/12 a single layer is standard. Below 2/12, shingles are the wrong covering entirely.

Is ice and water shield counted in these rolls?

No. Ice and water shield is a separate self adhering membrane, figured by length: eave runs get a band reaching two feet past the inside wall line in cold climates, plus every valley. Count it from your eave and valley lengths, not from roof area.

Can underlayment be the only waterproofing for a while?

Synthetic products are rated for months of exposure and shed water well, which is what dry in means. Felt is a short term cover only. Neither is a finished roof; both are the safety layer under one.

The layer nobody sees is the one that saves ceilings.

A free inspection checks the whole system, deck to ridge, before the next layer goes on.